Modern space style, with three sparkling gem satelites in orbit. One pair of earrings for the hands-on DIY woman. If you have a little beading or wire-wrap experience, this is a great starter project to explore jewelry making the way jewelers do it. The steps are simple: 1. cut the connecting wire between the two earrings in two places, right next to each earring (note: earrings are mirror images, left one has an l raised near the top, one marked and one unmarked make a pair) (Always wear eye protection when cutting metal (even with poultry shears, craft wire cutters or a jewelry saw)) 2. smooth the nubs where you cut with a fine nail file, fine emery board, and fine nail shine pad 3. gently push a 5mm cubic zirconia, or ruby, or sapphire into the pre-notched setting in each earring. (some gems are offered separately here, others gems are available in most cities, and online) 4. gently squeeze the settings with small flat nose craft pliers to be sure the gems will stay in place 5. check that the gem top is parallel with the earring and the gem is in all four notches in the prongs with a magnifying glass 6. use standard earwires (fancy ones are offered separately here) to wear the finished earrings Measurements: each 3 orbits earring is 21.6 mm wide by 36.7 mm tall by 10.2 mm deep (0.85 in wide by 1.44 in tall by 0.40 in deep). Quantity: 1 pair of earrings (2 pieces) is cast as one unit for you to cut apart Recommended gem size: faceted, calibrated 5 mm round (three per earring) Standard earwires, 0.84 mm (20 gauge) for drop earrings are appropriate (but not included).
Cautionary note about the 'natural silver / rough cast silver' material - it is rough, exactly as it comes from casting. If you are a jeweler with the proper finishing and polishing tools, that is fine, you will be able to do standard polishing. It is labor intensive and a little technical; so I do not recommend this finish for anyone who does not have standard jewelers studio polishing equipment.